SlowStreamer
04-21-10, 07:54 PM
Before we start we need to make sure you have your editor setup properly so you will see the icons that will assist you in embedding video and other multimedia into your Posts.
Go into your "User CP" and on left side look for "Edit Options"
Then scroll all the way to the Bottom of the page till you see the window like the one below and open the pull down selection box and set it to what you see in the picture below and save. That should give you the edit window format you see above.
http://i224.photobucket.com/albums/dd176/SlowStreamer/Misc/InsertImage_2.jpg
Then when you go to start a new thread or reply to a post you should see a editor window similar to the one below:
Note: if you go back into a thread to edit and you do not see the icons, you will have to click on the "Go Advanced" button to see the screen below.
http://i940.photobucket.com/albums/ad249/NGTO_PhotoBucket/misc/enhancededitorwindow.jpg
To add a YouTube Video to a post:
1-In YouTube highlight and copy the video # for the video you want to embed.
Typical YouTube video URL's look like this:
"http://www.youtube.com/watch?v=K_qM_8v5XBI"
1a - Right click and select just the YouTube video #
1b - This is the video# for the YouTube video link above - K_qM_8v5XBI
1c - if you are trying to embed a HD video, the video# looks like this K_qM_8v5XBI&ap=%2526fmt%3D22
*** Remember we will not tolerate any inappropriate material :tut::rules:
3 - Once you have copied the video#, then come back to NGTO, place your cursor where you would like to place the video in your post. Then click on the YouTube Icon http://i940.photobucket.com/albums/ad249/NGTO_PhotoBucket/misc/youtubeBBicon21X20.jpg located up on top right of the editor window.
4 - You will see 2 sets of brackets around the word "Youtube" appear in your post. Make sure your cursor is between the two brackets in the middle and then right click and paste the link you copied in Youtube.
5 - When you Submit your post you should see the video you embedded.
To add a PhotoBucket Slide Show to a post:
1 - After you have created your slide show in PhotoBucket click on the "Direct link" link and right click and copy.
2 - Then come back to NGTO, place your cursor where you would like to place the video in your post. Then click on the PhotoBucket Icon http://i940.photobucket.com/albums/ad249/NGTO_PhotoBucket/misc/photobucket21X20.jpg located up on top right of the editor window.
3 - You will see 2 sets of brackets around the word "PHOTOBUCKET" appear in your post. Make sure your cursor is between the two brackets in the middle and then right click and paste the link you copied in PhotoBucket.
4 - When you look at the link you just pasted you will see this code ?action=view¤t=. You will need to delete this part of the link, ?action=view¤t=
Example:
Before - "http://s940.photobucket.com/albums/ad249/NGTO_PhotoBucket/KIds%20Fishing%20Days/Garrard%20Landing%204_17_2010/?action=view¤t=b52566fd.pbw"
After - "http://s940.photobucket.com/albums/ad249/NGTO_PhotoBucket/KIds%20Fishing%20Days/Garrard%20Landing%204_17_2010/b52566fd.pbw"
5 - When you Submit your post you should see the Slide Show you embedded.
To add a PhotoBucket Video to a post:
1 - After you have created your video in PhotoBucket click on the "Direct link" link and right click and copy.
2 - Then come back to NGTO, place your cursor where you would like to place the video in your post. Then click on the PhotoBucket Video Icon http://i940.photobucket.com/albums/ad249/NGTO_PhotoBucket/misc/videocamera.jpg located up on top right of the editor window.
3 - You will see 2 sets of brackets around the word "PHBCKTVID" appear in your post. Make sure your cursor is between the two brackets in the middle and then right click and paste the link you copied in PhotoBucket.
4 - When you look at the link you just pasted you will see this code ?action=view¤t=. You will need to delete this part of the link, ?action=view¤t=
Example:
Before - "http://s940.photobucket.com/albums/ad249/NGTO_PhotoBucket/KIds%20Fishing%20Days/Garrard%20Landing%204_17_2010/?action=view¤t=FishWaterSlideKFD4_17_10.flv"
After - "http://s940.photobucket.com/albums/ad249/NGTO_PhotoBucket/KIds%20Fishing%20Days/Garrard%20Landing%204_17_2010/FishWaterSlideKFD4_17_10.flv"
5 - When you Submit your post you should see the video you embedded.
To add a Vimeo Video to a post:
1 - After you have created your video in Vimeo right click and copy the video ID # (the ID# is highlighted in RED below).
Ex. - "http://vimeo.com/"12345678
2 - Then come back to NGTO, place your cursor where you would like to place the video in your post. Then click on the Vimeo Video Icon http://i940.photobucket.com/albums/ad249/NGTO_PhotoBucket/misc/videocamera_4.jpg located up on top right of the editor window.
3 - You will see 2 sets of brackets around the word "VIMEO" appear in your post. Make sure your cursor is between the two brackets in the middle and then right click and paste the just the video ID# link you copied in Vimeo.
4 - When you Submit your post you should see the video you embedded.
Thanks.
Go into your "User CP" and on left side look for "Edit Options"
Then scroll all the way to the Bottom of the page till you see the window like the one below and open the pull down selection box and set it to what you see in the picture below and save. That should give you the edit window format you see above.
http://i224.photobucket.com/albums/dd176/SlowStreamer/Misc/InsertImage_2.jpg
Then when you go to start a new thread or reply to a post you should see a editor window similar to the one below:
Note: if you go back into a thread to edit and you do not see the icons, you will have to click on the "Go Advanced" button to see the screen below.
http://i940.photobucket.com/albums/ad249/NGTO_PhotoBucket/misc/enhancededitorwindow.jpg
To add a YouTube Video to a post:
1-In YouTube highlight and copy the video # for the video you want to embed.
Typical YouTube video URL's look like this:
"http://www.youtube.com/watch?v=K_qM_8v5XBI"
1a - Right click and select just the YouTube video #
1b - This is the video# for the YouTube video link above - K_qM_8v5XBI
1c - if you are trying to embed a HD video, the video# looks like this K_qM_8v5XBI&ap=%2526fmt%3D22
*** Remember we will not tolerate any inappropriate material :tut::rules:
3 - Once you have copied the video#, then come back to NGTO, place your cursor where you would like to place the video in your post. Then click on the YouTube Icon http://i940.photobucket.com/albums/ad249/NGTO_PhotoBucket/misc/youtubeBBicon21X20.jpg located up on top right of the editor window.
4 - You will see 2 sets of brackets around the word "Youtube" appear in your post. Make sure your cursor is between the two brackets in the middle and then right click and paste the link you copied in Youtube.
5 - When you Submit your post you should see the video you embedded.
To add a PhotoBucket Slide Show to a post:
1 - After you have created your slide show in PhotoBucket click on the "Direct link" link and right click and copy.
2 - Then come back to NGTO, place your cursor where you would like to place the video in your post. Then click on the PhotoBucket Icon http://i940.photobucket.com/albums/ad249/NGTO_PhotoBucket/misc/photobucket21X20.jpg located up on top right of the editor window.
3 - You will see 2 sets of brackets around the word "PHOTOBUCKET" appear in your post. Make sure your cursor is between the two brackets in the middle and then right click and paste the link you copied in PhotoBucket.
4 - When you look at the link you just pasted you will see this code ?action=view¤t=. You will need to delete this part of the link, ?action=view¤t=
Example:
Before - "http://s940.photobucket.com/albums/ad249/NGTO_PhotoBucket/KIds%20Fishing%20Days/Garrard%20Landing%204_17_2010/?action=view¤t=b52566fd.pbw"
After - "http://s940.photobucket.com/albums/ad249/NGTO_PhotoBucket/KIds%20Fishing%20Days/Garrard%20Landing%204_17_2010/b52566fd.pbw"
5 - When you Submit your post you should see the Slide Show you embedded.
To add a PhotoBucket Video to a post:
1 - After you have created your video in PhotoBucket click on the "Direct link" link and right click and copy.
2 - Then come back to NGTO, place your cursor where you would like to place the video in your post. Then click on the PhotoBucket Video Icon http://i940.photobucket.com/albums/ad249/NGTO_PhotoBucket/misc/videocamera.jpg located up on top right of the editor window.
3 - You will see 2 sets of brackets around the word "PHBCKTVID" appear in your post. Make sure your cursor is between the two brackets in the middle and then right click and paste the link you copied in PhotoBucket.
4 - When you look at the link you just pasted you will see this code ?action=view¤t=. You will need to delete this part of the link, ?action=view¤t=
Example:
Before - "http://s940.photobucket.com/albums/ad249/NGTO_PhotoBucket/KIds%20Fishing%20Days/Garrard%20Landing%204_17_2010/?action=view¤t=FishWaterSlideKFD4_17_10.flv"
After - "http://s940.photobucket.com/albums/ad249/NGTO_PhotoBucket/KIds%20Fishing%20Days/Garrard%20Landing%204_17_2010/FishWaterSlideKFD4_17_10.flv"
5 - When you Submit your post you should see the video you embedded.
To add a Vimeo Video to a post:
1 - After you have created your video in Vimeo right click and copy the video ID # (the ID# is highlighted in RED below).
Ex. - "http://vimeo.com/"12345678
2 - Then come back to NGTO, place your cursor where you would like to place the video in your post. Then click on the Vimeo Video Icon http://i940.photobucket.com/albums/ad249/NGTO_PhotoBucket/misc/videocamera_4.jpg located up on top right of the editor window.
3 - You will see 2 sets of brackets around the word "VIMEO" appear in your post. Make sure your cursor is between the two brackets in the middle and then right click and paste the just the video ID# link you copied in Vimeo.
4 - When you Submit your post you should see the video you embedded.
Thanks.