NGTO Message Board
Welcome to NGTO!
Home ] [ Membership ] [ Donations ] [ Feedback ] [ Stream Reviews ] [ Stream Reports ] [ Maps ] [ Events ] [ Photos ] [ Articles ] [ Rules and Regulations ] [ Archives ] Message Board ] FAQ ] [ Hall of Fame ] [ Sponsors & Supporters ] [ About ] [ Witticisms ]
Welcome to NGTO!

Go Back   NGTO Message Board > Fly Tying Bench > Fly Tying
Register Blogs FAQ Members List Calendar Photo Gallery Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
Old 12-16-99, 11:58 PM   #1
Drifter
Former Director, HOF
 
Drifter's Avatar
 
Join Date: Dec 1998
Location: Newnan, GA and on the banks of the Tuck
Posts: 5,843
Question

My next rodbuilding project will be a 12-weight for those angry tarpon on the Florida flats. "Course I'll need a reel to go with it! Anyone have a suggestion for a good saltwater reel that will hold about 200 - 300 yards of backing at a decent cost? It must have a good drag--hopefully cork. I can't justify paying $500 for a reel.

David,

You got any deals on a 12 weight blank (4-piece)?


------------------
The Drifter <'(((><
------------------
The Virtual Fish Camp
Let's Fish The White River!
NGTO Fling on the "Hi"


Drifter is offline   Reply With Quote
Old 12-17-99, 08:21 AM   #2
WDNFLY
Native
 
Join Date: Mar 1999
Location: SYRACUSE,NY
Posts: 194
Lightbulb

Try Shikari for your blank. The web address is Shikariblanks.com. They are the only blanks I build with. I'm not sure about the 4pc situation. I have a 10x that is one very powerful rod. It's still n blank form but I plan ti build it for Tarpon, I like going light.
For the reel try J.Ryal's new large arbor reels. Very nice and the drag could stop a train. If yu can't find them locally my local shop has shipped stuff for NGTO members in the past so let me know if you need to contact them. If the make one big enough you woud be very pleade with both the performance and the price.
WDNFLY is offline   Reply With Quote
Old 12-28-99, 01:14 PM   #3
Chris England
Native
 
Join Date: Oct 1998
Location: Cumming, GA
Posts: 922
Lightbulb

Check out Talon for blanks as well. Superb! http://www.talon-graphite.com

For the reel, you can't go wrong with Abel. But most importantly, you're not going to be looking for a "drag that can stop a train." In selecting a drag, make sure that it has a large disk surface, has no hesitation on the initial surge, and *can* lock down extremely tight for pulling a fish up off the bottom.

This may be somewhat contrary to the previous poster's advice, but bear with me for a second. I've caught a few tarpon in my life.

A #10 is barely sufficient... maybe for true flats fishing, down in the key's but even then it's going to be tough especially if you hook a fish over 100lbs.

Here's problem #1... When the fish pulls you across hells half acre, very often he'll lay up in deep water (we're talking fish in the 160lb class here) That #10 is going to be hard pressed to lift the fish off the bottom, and get it up beside the boat where you can release it safely. Fighting big Tarpon for a long time is frowned upon in FL. (about as much as seeing a corn chunker on a trophy trout stream. You'll definately get hollered at if you fight it too long. in the parts of Florida I fish, the locals are a little more abrupt at letting you know if your doing something "against the rules" so to speak. Especially if you're boat has an out of state # on it.)

The stress that a long fight puts on these fish is immense, and you owe it to them to get them in quick (but not green) and release them alive.

The second problem with a light rod and a big Tarpon is going to be preventing it from gulping air. When a tarpon is starting to get worn out, it porpoises to the surface and grabs a gulp of air. When it does this, the fight is back on. It's like giving the **** fish a gulp of gatorade, and a snort of coke. You have to *attempt* to prevent this by submerging your rod, and keeping the fish from gulping by applying downward pressure.

Third and lastly, is more of a fighting issue, and won't apply so much to smaller tarpon. Side pressure. When you fight large fish, you break them down by constantly applying side pressure. You apply pressure to the fish in the exact opposite direction that it is moving in. When it is swimming from your right to the left, your rod will be horizontal and you should apply pressure in the opposing direction. In this case the rod will be on your right side, and you'll be pulling the rod to the right. Insufficient side pressure just won't get the job done quickly.

Hope this helps.

BTW: If you're serious about getting into saltwater fly fishing, you need to read Lefty Kreh's book on the subject. He even spends a little time talking about the optimal rod designs for various types of fishing.
Chris England is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 11:01 AM.


Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.
vB.Sponsors
Copyright 2010 - North Georgia Trout Online - All Rights Reserved